The Ableware Pot and Pan Holder, model H753430000, is designed to keep pots and pans steady on the stove so that individuals with the use of one arm can stir or dish out the contents of the container. The device consists of a plastic coated steel wire frame with three suction feet. It holds the handle of the pot or pan to prevent movement while thecontents are being stirred. DIMENSIONS: 16 x 4.5 inches. WEIGHT: 1 pound. WARRANTY: 12 months parts and labor.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Lifter, or handle for picking up small roasting pans, cake tins and other small pans with a lip. Handle made with a piece of plastic pipe union (or a piece of plastic pipe about 4 inches long and 1 inch in diameter) and two pieces of 1/8 inch stainless steel wire. The wire is slipped through the pipe and bent at its edges at 90 degrees with one wire fitted into notches to hold it steady and the other allowed to swing free. The tips of the wires are ben
---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted handle device which allows individuals with arthritis or grasping or upper extremity disabilities to safely support and move cookware around the kitchen. Australian university student, Ching-Hao Hsu, designed the Arthritis Handle. The Arthritis Handle slips over the forearm and allows the user to safely support the cookware on its journey around the kitchen. The Arthritis Handle is made from thermoplastic elastomers and h
--- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself (DIY) assistive pan holder for individuals with upper extremity or grasping disabilities or the use of only one hand. The DIY assistive pan holder is designed to be a low-cost alternative for individuals with disabilities who cook. To begin, prepare three suction cups. If top section (grip) of a suction cup is round, use an Exacto knife to make the sides flat so that a lateral hole can be drilled through the suction cup's gri
This Folding One Handed Pot Stabilizer is designed for users with one hand or missing a limb. It is designed for individuals with one handed ability, or limited arm strength, arthritis- or for anyone who would prefer to use one hand. The pot stabilizer suctions onto the stovetop surface and holds pots and pan handles in place. This product is tall enough to accommodate most pots or pans. It is made out of aluminum with rubber suction cups and it folds for storage when item is not is use.
The Folding Pan Holder, model BK3010, is a plated steel pan holder designed for use by individuals with the use of one hand. Featuress include a suction feet to affix the holder to the stove top to prevent movement of pan while stirring with one hand, a slot that holds the handle of the pan,and legs that fold in for easy storage.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Holds the handle of a cooking pan on the range stable for a person with limited coordination or use of one hand only. Device made from two pieces of 1/2 inch plywood, 4 by 5 and 2 1/2 by 5 1/2 inches, one cut into a triangle, the other into a U shape with the opening to fit the pan's handle; and three small screw-on suction cups. Includes photograph and plan. SKILLS REQUIRED: Woodworking. AUTHOR: Strebel, M B; comp TITLE: Adaptations and Techniques for
The Pan Holder, model 3011, is a pan holder designed for use by individuals with use of hand. This steel rod frame pan holder is latex free and mounts to a stove top with three suction feet. The device holds the handle of pan in vertical slot to prevent movement while stirring with one hand. The unit accommodates pots with handles up to 5 inches above base. DIMENSIONS (HxL): Frames measures 4.5 x 16 inches.