The ACE-AUT Secondary Control Center is a computer-controlled driving system that operates all secondary accessory driving functions. The control center is programmed to operate 48 driving accessory functions. It is operated by a small, six-button console. Visual displays by the original equipment manufacturer are unobstructed by this compact configuration. The dash-mounted display visually cues each function. Standard euqipment includes manual override switching and self-cancelling turn signals
The Adapted Mercedes 190E is a voice activated, microcomputer based driving control system adapted for the Mercedes Benz 190E automobile. Steering, brakes and accelerator are foot controlled. Other functions are voice controlled; provides up to 50 commands. Voice activated functions include operation of the hand brake, headlights, automatic gear shift, turn indicators, radio, and windshield wipers.
The AEVIT L Series Gas and Brake Control is a driving control system designed for use by individuals with lower extremity disabilities. This stand-alone accelerator and brake control system utilizes a lever input device with an adjustable maximum required input force ranging from 2.4 to 5.0 pounds. The input device can be positioned for either left hand or right hand operation, and the Gas/Brake input direction is user-selectable.
The AEVIT W-Series Steering System is a small steering wheel designed for use by individuals with upper extremity disabilities. It utilizes a miniature wheel input device. The total number of rotations from full left steer to full right steer is 6-3/4 turns, which is approximately twice the rotations of the OEM steering wheel. The force input required to turn the wheel is 0.2 pounds as measured at a position of 3 3/8 inches from center. DIMENSIONS: Wheel input device is 6 inches in diameter.
The AEVIT XJ-Series Steering System is a sensitized steering control system designed for use by individuals with upper extremity disabilities. This stand-alone steering control device utilizes a single axis joystick input device. The joystick is constrained to move only in the X-axis, that is, from side to side. The mechanism requires a maximum input force of only 0.2 pounds, and is internally spring-loaded to return to the center, or null, position. This input device can be positioned for eithe
The AEVIT YJ Series Gas and Brake Control is a driving control system designed for use by individuals with lower extremity disabilities. This stand-alone accelerator and brake control utilizes a single axis joystick input device that requires a maximum input force of 0.2 pounds. The joystick input device is constrained to move only in the Y-axis and is internally spring-loaded to return to the center, or null, position. The input device can be positioned for either left hand or right hand operat
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: To activate the brakes of a White 4-210, 4 wheel drive tractor, for operators with upper and lower extremity impairments. Recommends that a driver's education instruction brake pedal assembly be mounted sideways to the frame of the cab. The operator uses his right hand and shoulder muscles to push the pedal which pulls on a cable connected to the brake pedal on the floor. A flexible sheath carries the cable down to the floor of the cab below the tracto
Using robotics, laser rangefinders, GPS, and smart feedback tools, Dennis Hong is building a car for drivers who are blind. He is careful to note that it is not a "self-driving" car, but a car in which a non-sighted driver can determine speed, proximity and route — and drive independently. Professor at Purdue University (2002) Dennis Hong, PhD is developing a car that can actually be driven by the blind. The aim is to integrate several computer systems, sensors, and cameras to observe the enviro
The Car Starter is a key turner that provides extra leverage for use by individuals with arthritis or grasping disabilities. The car starter works with almost all car keys, including those with plastic head covers. The key turner can also be used for a car door, trunk keys, as well as your regular home keys. ?The device can hold up to two plastic head keys or up to 4 keys without plastic heads. Keys fold in when not in use.
The Carbon Fiber Look Wheel Knob is a steering wheel knob for individuals who have the use of only one hand to assist them when driving. Can be used on multiple motor vehicle types, and fits virtually any car.
The Customized Hand Controls are a driving control system designed for use by people with lower extremity or neurological disabilities or spinal cord injury to use only their hands to operate automobiles, trucks, self-propelled lawn and garden equipment (including riding lawn mowers), and farm vehicles (including tractors). Each set of controls is individually developed for a user. The controls can be applied to the clutch, brakes, throttle and any other function of the vehicle. They can be int
The Digipad-II Econo Series Touchpad is a driving control system designed for use by individuals with upper extremity disabilities. It can be configured for almost any make or model of vehicle. The touchpad can be used to access 15 commonly used vehicle functions: ignition; start; intermittent, low and high wipers; wiper wash; park lights; headlights; low, medium, and high front fan speeds; cruise on; cruise set; park brake; and one additional auxiliary function. Access to these 15 functions is
The Digital Shifter is a computer-controlled driving system designed for use by individuals with upper extremity disabilities. The system allows a person having limited hand/arm strength and range of motion to shift an automatic transmission. The Digital Shifter is microprocessor-controlled and interfaces with most vehicles by dip switch selection. The system comes with the ACE Digital Shifter, the ACE Digital Shifter Actuator and Customer Interface switches. In positive shifting with one press
The Digitone Audible Switching Device is a driving control system designed for use by individuals with physical disabilities. This device enables the driver to activate up to eight vehicle functions using one switch. Functions that can be activated include turn signals, horn, dimmer, wiper speeds, wiper wash, cruise on, and cruise set. When the switch connected to this device is depressed, the device begins emitting a series of eight different tones of a musical octave, each of which is assigned
Digivoice is a driving control system designed for use by individuals with upper extremity disabilities. This system allows voice operation of up to 16 vehicle controls such as shifter functions, turn signals, horn, headlight dimmer, and wipers. The driver touches a single telco-style ACT switch (not included) to activate the system. When the switch is depressed, the system says "READY" and the driver speaks the name of the desired function into the supplied microphone. The function is then acti
The Doron L-300 R/A is a simulated training driving aid system for persons with diabilities. It creates a realistic substitute for on-street driving, helping the driver to develop the ability to recognize, analyze and correctly respond to traffic situations. The system may be motified for hand controls and wheelchair accessiblity. This driver training system consist of three elements. First, an instructor console, with full color monitor, and a selectable touch screen display. The IBM compatible
The Doze Alert Driver Sleep Alarm is a driver head position alert device designed to warn drivers when they are falling asleep at the wheel. Worn behind the ear, the device buzzes loudly (86 decibels) when the wearer's head falls forward. POWER: Uses a button cell battery (included). WEIGHT: 0.5 ounce.
Quad hand control grip attaches to Drive Master Hand Control (see separate entry) to provide adaptation of regular hand control for quadriplegic who has little wrist or hand strength. L shaped wrist support attaches to conventional hand control. Used with dimmer switch ( D2, see separate entry) and Horn button (D3, see separate entry). Use only with Drive Master hand controls.
Driving control system positions secondary (ignition) controls and auxiliary (wiper, etc.) controls from dash board of vehicle at driver's right. Toggle switches for auxiliary controls, and key switch to turn for ignition. Flip switch for wipers. Operates with minimum of effort. Typical control box approximates size of standard hard back book.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Designed for persons with limited mobility and reach, adaptors and extension handles can be used to control electrical equipment and key switches. Long extension handles can be made from sections of steel tubing with two notches cut out on one end and a crosspiece welded to the other to form a 't" handle. Short pieces of rubber heater hose are clamped onto the control knobs of electrical equipment, such as a car radio or air conditioner. To operate the
The FDS Transportable Hand Control is an automobile hand control designed for use by individuals with lower extremity disabilities or spinal cord injury. Made of aluminium and stainless steel, the device enables the driver to accelerate and brake manually, and has a swivel knob for single hand steering. The control is foldable and is stored in a pouch. It can be installed in almost any vehicle by clamping the connecting rods to the corresponding pedals, strapping the clamps for safety, adjusting
The Freedom Staff Thumb Control Hand Controls are helpful adaptive driving controls for people who can't use their legs to control the brake and gas pedals of a car. The Freedom Staff Thumb Control Hand Controls allow users to brake by pushing down the thumb control and accelerate by gently pulling the lever towards them. They attach to most any automatic transmission car. Their design allows the user to easily handle the steering wheel with one hand while operating the hand and thumb control de
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: To eliminate need for gripping during operation of skid loader by persons with hand impairments. The hand portion of the splint was heated and molded around a short section of 1 inch black PVC pipe which rests in the palm of the hand. The splint is held to the wrist by velcro straps. To operate a lever, the user places the pipe over it and then pushes or pulls without gripping. SKILLS REQUIRED:Moldmaking. Plastics. AUTHOR: Field, W.E. TITLE:Agricultura
The Kenguru® Electric Car is a wheelchair accessible electric vehicle designed for wheelchair users who want to remain seated in their wheelchair while driving. Utilizing an all-electric, front-wheel drive platform, the vehicle is powered by the patented KLD oneDRIVE®? system and features a unique rear-entry lift-gate and ramp, making access convenient for members of the wheelchair community.
The Mini-Touch Vehicle Control Pad is a hand-operated driving control system designed for use by individuals with lower extremity disabilities or spinal cord injury. This steering wheel mounted control pad enables hand control of vehicle functions such as wipers, turn signals, horn, and high/low beams. The standard unit has 6 functions. Original controls remain fully functional. The control is transferable to most makes and models of vehicle, and can be configured for foot-control use. OPTIONS:
-- PROTOTYPE --------- PURPOSE: To create a prototype of a device that allows drivers with disabilities steer, accelerate, change gears and brake with one hand. Users with reduced hand strength can easily use this device since it is completely electronically controlled—no mechanics are involved. To simulate the natural haptic feedback provided by a mechanical steering wheel, motors have been added to the device to simulate those sensations. The ease in which the device is operated can also be ad
The Power Headrest is a powered headrest and driving control system designed for use by individuals with upper extremity disabilities, severe physical disabilities, or spinal cord injury. This headrest features motorized activation to swing it into position for driving and to the storage position for unencumbered exit and entry into driving position. Its driving control function enables drivers with disabilities that limit hand/finger usage while driving to access turn signals, horn, dimmer, wip
QuicStick Portable Handicap Hand Controls for Cars is designed as a driving hand control with a push and pull motion for handicap drivers to press the gas and break pedals in a vehicle with upper body coordination. It is light, durable, comfortable, and easy to use. It fits most cars and can be used on multiple motor vehicle types. The QuicStick Portable Handicap Hand Controls for Cars? is not permanant and can be attatched and detached. Installs in less than 5 minutes.
Remote control engine starter that turns on vehicle engine and heating or air conditioning system from distance up to 400 feet. Defroster included for winter months. Device automatically restarts motor if vehicle stalls. Remotostart automatically goes off if vehicle door is opened or if foot brake is applied to prevent vehicle theft. Operates with push button (operation similar to that of garage door opener. Can be transferred from one vehicle to another. Anti theft provisions built in to device
The Scott Driving System is a one-hand driving control system designed to enable quadriplegics, paraplegics, persons with limited or no use of one or more limbs, and persons with other disabilities to perform all driving tasks without assistance, including entering and leaving the vehicle. DRIVING CONTROL SYSTEM: A single lever system combines all actual driving functions. Forward movement of the control column actuates the accelerator. Backward movement applies the brakes. Rotation of the mini-
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Designed for operators with lower extremity impairments, foot guards help keep one's legs from slipping. A handle, allowing hand shifting, is attached to the foot activated shifter mechanism. The foot guard is constructed of mild steel bar stock and flat steel, with one edge rough or toothed to prevent slipping. The footguard is mounted directly over the existing foot rest, and no major modifications are needed to accommodate the guard. The gear shifte
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Designed for an ATV operator who has use of the right foot, but not the left. The foot guard is constructed of mild steel bar stock with flat bar stock welded to it for mounting brackets. It is bolted to the bracket holding the existing foot rest and also to the outside end of the footrest. A conversion linkage which allows gear shifting from the opposite side of the ATV is attached to the existing gear shift lever. The linkage passes through the frame
Smart Shift is a driving control system designed for use by individuals with upper extremity disabilities. This stand-alone electronic gear selector includes a touchpad control and actuator that offer touch-button access to park, reverse, neutral, and drive. A Drive 2 option can be configured for low gear in most applications. Each raised tactile button on the touchpad features center illumination and a universal icon; the buttons are widely spaced to prevent inadvertent function activation. Thi
The STISIM Drive M100-OT & M100WS-OT is a driving simulator and assessment and evaluation system designed for use by an occupational therapist (OT) to assess patients in rehabilitation hospitals and clinics. The system includes STISIM Drive Software; 1 (model M100-OT) driver display screen or 3 (M100WS-OT) driver display screens; 1 Dell computer work station (M100-OT) or 3 Dell work stations (M100WS-OT) with Microsoft Windows and high performance nVIDIA graphics card; 1 operator display scre
The STISIM Drive M300-OT & M300WS-OT is a driving simulator and assessment and evaluation system designed for use by an occupational therapist (OT) to assess patients in rehabilitation hospitals and clinics. The system includes STISIM Drive Software; 1 (model M300-OT) driver display screen or 3 (M300WS-OT) driver display screens; 1 Dell computer work station with Microsoft Windows and high performance nVIDIA graphics card; 1 operator display screen; a STISIM Drive high fidelity advanced cont
The STISIM Drive M300WS-OT-Console is a driving simulator and assessment and evaluation system designed for use by an occupational therapist (OT) to assess patients in rehabilitation hospitals and clinics. This portable system is mounted on a wheeled base and includes 1 Dell computer work station with Microsoft Windows, STISIM Drive Software, and a high performance nVIDIA graphics card in a lockable computer bay; 3 driver display screens; 1 operator display screen; an ergonomic auto seat with sa