Prone Standers
Results: 46
Alicia Prone Stander (Models Aps1, Aps2, & Aps3)
The Alicia Prone Stander is a prone stander designed for use by children with lower extremity, neurological, or walking disabilities. The basic stander includes four lateral supports, two 2-inch straps, contoured knee supports, shoe holders, tray, and locking casters. The tray is height- and angle- adjustable. The stander angle adjusts from 90 to 60 degrees. OPTIONS: Posterior pelvic support gate, back support extension, back/head support extension, and inset activity box. SIZES: Small (model AP
Baby Prone Board.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Tilted prone board for a young child with head control; it leaves the hands free to play while helping to keep the hips and knees straight. Plywood board with a cutout for the toes and a footrest. The front end of the board is higher than the rear. Includes drawing and photograph. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Aids for Your Handicapped Child REF: London, England: Souvenir Press: p 62-63. Also available from Prentic
Gazelle By R82
The Gazelle is a prone stander designed for use by children with mobility disabilities. Available in three sizes, this stander may also be used for postural drainage and as a tilting table with a variety of adjustments between 15 and 90 degrees. It features a Y-shaped base with four locking wheels, foot-pedal angle adjustment and a degree meter, height- and width-adjustable footrests, rear support, padded chest support, and padded knee supports. The leg rests are independently adjustable with ea
Growth Guidance Standing Systems
The Growth Guidance Standing Systems is a prone standing system on a wheeled base: toddler, youth or junior sizes. Size adjustments include girth adjustment of pelvic hip control, height and width of knee controls, height of foot controls, height and girth of chest control. Position adjustability includes anterior and posterior bands at all controls, placement of lateral supports, medial lateral position of knee controls, position of chin rest, column tilt, tray angle, position of neckrest and s
Independent
The Independent is an adjustable vertical stander designed for children from 18 months old to young adult who require moderate levels of support when weight bearing while in supported standing. The Independent supports users at the feet, knees, hips and trunk. The height, width and angle can be adjusted independently for a customized fit. It is designed to promote increased comfort and support by providing soft, padded thoracic and pelvic bands as well as padded knee cups. The Independent comes
Jenx Monkey Prone Stander
Specifically designed to appeal to young children and their families, the Jenx Monkey is a fun and gentle introduction to standing. Offering smooth and easy angle adjustment, even with the child in the product, the Monkey can go from upright at 90 degrees, down to 20 degrees prone – providing a way to gradually build tolerance to standing as part of a therapy program. The capacity for outstanding thoracic and pelvic support coupled with flexible leg positioning make the Monkey prone stander an o
Jenx Prone Stander - Size 1- Orange
Jenx Prone Stander Orange is a dedicated prone stander designed to provide support anteriorly for children with mobility and neurological impairments such as cerebral palsy, spina bifida and Tethered spinal cord syndrome. The individual support pads can be adjusted in relation to each other to ensure a proper fit. Children with longer bodies and shorter legs can be just as comfortable as those with shorter bodies and longer legs. The hip and chest straps are closed in the center and then adjus
Jenx Prone Stander - Size 2 - Green
Jenx Prone Stander-Green is a dedicated prone stander designed to provide support anteriorly for children with mobility and neurological impairments such as cerebral palsy, spina bifida and Tethered spinal cord syndrome. The individual support pads can be adjusted in relation to each other to ensure a proper fit. Children with longer bodies and shorter legs can be just as comfortable as those with shorter bodies and longer legs. The hip and chest straps are closed in the center and then adjust
Jenx Prone Stander- Size 1 -Orange
Jenx Prone Stander-Orange is a dedicated prone stander designed to provide support anteriorly for children with mobility and neurological impairments such as cerebral palsy, spina bifida and Tethered spinal cord syndrome. The individual support pads can be adjusted in relation to each other to ensure a proper fit. Children with longer bodies and shorter legs can be just as comfortable as those with shorter bodies and longer legs. The hip and chest straps are closed in the center and then adjus
Kidstand Prone Stander
The Kidstand Prone Stand is an adjustable prone stander with positioning components. The components a chest board, pelvic board, chest strap, fanny strap, trunk pads, hip pads, independently adjustable footboards, contoured adjustable knee pads, and a Lexan tray. Chin rest and shoulder protraction pads for the tray are also available. The unit is free standing, with 4 locking casters. The stand has a metal frame with red epoxy powdercoat finish and black vinyl upholstery. DIMENSIONS: Two sizes:
Leckey Mygo Stander
The Leckey Mygo Stander is a 3-in-1 supine, prone and upright stander designed for children ages 4 to 14 years old with lower extremity disabilities to provide complete support coverage while engaging in therapeutic standing activities. Also good for those with up to 25 degree contractures. Full adjustable to meet complex positioning needs. Angle adjustable from 0 to 80 degrees horizontal. Machine washable pad covers.
Leckey Pronestander
The Leckey Pronestander is a standing aid designed for use by children and adults with mobility disabilities. This stander permits prone positioning. Standard features include a multi-position chestplate and flexible lateral supports that allow for growth, finite positioning, and trunk control; a pelvic band that encourages mid-line symmetry and weight distribution; height- and laterally-adjustable knee blocks; curved rigid hip supports; and a height- and angle-adjustable tray with a molded rim
Leckey Squiggles Stander with Pivot Base
Mobile Prone Board With Adjustable Angle.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Prone board on casters which can be adjusted so the child can lie at various angles. Prone board made with 2 pieces of plywood 12 by 30 inches, 4 casters, 2 hinges and an angle adjustment block - softwood, approximately 2 by 4 by 12 inches. Includes instructions and a drawing. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Aids for Your Handicapped Child REF: London, England: Souvenir Press: p 124. Also available from Prentice-Hall
Mulholland Rocket Stander
The Mulholland Rocket Stander is a prone/supine/upright stander for preschool children with neurological and physical disabilities weighing up to 50 lbs. The stander is designed to promote eye contact during peer interaction. It has a quick-folding frame for storage. With its standard features, the stander offers support for children with mild to more severe levels of physical disability. Adjustments can be made to the chest, hip, knee and foot supports to accommodate children of varying sizes a
Omni Stander
The Mulholland Omni Stander is a mobile standing aid designed to meet a variety of standing needs for children with mobility disabilities. The unit converts from a prone stander to a supine stander to a mobile prone stander. Adjustable postural supports accommodate growth and changing needs. The large, quick-release wheels include handrims for self-propulsion and the stander can be disassembled without tools for transport and storage.
Ormesa Dondolino Prone
The Ormesa Dondolino is a heavy duty tilting prone/upright stander for children with special needs. Available in 3 sizes, the Dondolino special needs stander provides support for children with mild to moderate physical disabilities. The Ormesa Dondolino is latex-free, and features adjustable pelvic supports, kneepads, table, frame and wooden base.
Out / Stander (Models Os 1000 & Os 2000)
The Out/Stander is a prone, upright, and supine stander designed for use by children with lower extremity, neurological, or walking disabilities. The stander enables standing in all three positions, and offers a choice full-body anterior and posterior supports. The stander can also be positioned horizontally to facilitate transfers. Features include a central post with tilt mechanism with a ratchet handle and pin for secure angle adjustments; foot restraint and heel cups with lateral and front-t
Parapion
Parapion is an upright stander designed for use by children with limited lower extremity strength and coordination associated with neurological involvement such as cerebral palsy, ataxia, and hypontia. It offers trunk and pelvic supports for security and stability.
Pre-School Prone Stander (Model 106) & Child's Prone Stander (Model 104)
The Pre-School Prone Stander, model 106, and the Child's Prone Stander, model 104, are prone boards with casters designed for use by children with neurological or balance disabilities. These standers are designed to be supported against a sturdy table or counter. The units are adjustable to vary the angle from horizontal and adjustable table/counter rests allow positioning at different distances supporting surfaces. The units latch to the supporting surface with cord, hook, and eye screws for s
Prone Board (Model 201)
Prone board. Angles adjust to eight positions from 0 to 90 degrees. Adjustable chest pad with strap, knee board with straps, footboard with blocks, figure 8 toe and ankle straps, adjustable back and hip strap and removable middle board. Safety position lock. Positive retracting stand. Adjustable birch plywood lapboard, 19 by 24 inches. Blue denim upholstery. Five inch casters. Base width 27 inches; base length 43 inches. 84 pounds. Safety position lock, adjustable brakes. Support pads adjust fro
Prone Stander
Chromed tubular steel frame with movable support areas, adjustable height and angle of incline. Padded areas support the trunk and knees. Plastic shoe holders attach to wooden footrest with velcro. Pivoting front support leg permits adjustment of angle of incline. Straps across hips and chest provide support. Accessories: pommel, abduction wedge, foot blocks or wedges to accommodate leg length discrepancy or tight heel cords, removable tray, lateral trunk and hip supports, toy bar. Available to
Prone Stander
The Prone Stander is designed for children who require support while standing and wh require changes in position and angle. FRAME: The lightweight aluminum frame has heavy-duty locking casters and adjusts from almost horizontal (40 degrees) to amost horizontal (70 degrees). SUPPORTS: Soft foam upper torso support with adjustable side supports; an adjustable knee board; a knee abductor; and back, leg, and buttocks straps with D-ring closure. UPHOLSTERY: Water-resistant nylon. FOOT BOARD: Multi-ad
Prone Stander (Model 130)
The 130 Prone Stander can also be used as a supine stander. It has an X-shaped chrome steel base and a flat torso support with adjustable laterals, pads, knee blocks and footplates. The stander also has adjustable velcro belts. An optional tray is available. DIMENSIONS: Base is 36 x 36 inches; stander is height adjustable from 20 to 40 inches, and angle adjustable from 85 to 180 degrees. Transport size is 12 x 36 x 36 inches. WEIGHT: 20 pounds without tray; 24 pounds with tray.
Prone Stander.
Prone stander can be adjusted in height from 50 cm to 175 cm. Its base can be widened an extra 30 cm for increased stability. The height and width of the lateral supports, as well as adjustable hip and knee supports. The footrest mechanism permits individual adjustment of the feet for better distribution of pressure. The unit is equipped with four individually locking casters. Tray can be equipped with elbow pads. No dimensions provided.
Prone Stander.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Adjustable stander allows a child who has difficulty standing or walking to bear partial weight while in a secure position. Instructions for constructing a wood prone stander, adjustable to the height of the child. Includes drawing. COMMENTS: Should be used only on the advise of a therapist. SKILLS REQUIRED: Woodworking. AUTHOR: Arnold, P L TITLE: Designing for Individual Needs: A Manual on the Design of Environments, Furnishings and Materials for Indi
Prone Standers With Desk (Models 102, 103, & 107)
The Prone Standers with Desk, models 102, 103 and 107, are designed for use by children and adults with mobility and neurological disabilities. Models 102 and 103 are designed for children 18 months to 11 years of age, up to 58 inches tall; Model 107 is designed for users from years of age to adult, or from 48 to 71 inches tall. FRAME: Wooden with an extended base for near vertical positioning, adjustable angle varies 40 to 80 degrees from horizontal. The base has 4-inch swivel locking casters (
Prone Standing Board For Use In The Classroom.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Prone standing board as a part-time alternative to a wheelchair for some activities in a classroom; it allows the child to participate in activities while head stability and extensor tone are being promoted. Padded 3/4 inch pressboard (made to fit the child) is fastened to an old tricycle frame along with training wheels in the front, for stability, and a height- adjustable footboard. Includes instructions and photographs. COMMENTS: Developed at the SP
Prone Standing Frame Candidate For Batch Producers, Do-It-Yourselfers.
"DO IT YOURSELF" ENTRY
PURPOSE: Stander to hold a child in an upright position and provide a play tray; or can be reconfigured to make a chair with a tray. Stander or seat for a very young child. Made of wood with an adjustable foot board and removable tray for toys or activities. A wide foam pad goes around the child's front and sides, and there is a wide strap to keep the child upright. The device can also be used as a chair by putting the footboard at seat height and moving the tray to the ot
Prone Support Walker - Toddler
The Prone Support Walker - Toddler is a prone stander and walker for children with 9.5 to 14 inch crotch height, 6 inch chest width or 20.5 inch chest circumference. Frame has steel legs, cushioned handlebars, machine washable nylon slip covers, and 4 8-inch indoor-outdoor casters. It promotes walking by stabilization of proximal joints, bilateral control of extremities, maintenance of hip abduction and dynamic weight bearing on arms and legs. It includes two positioning belts. The handlebar, ch
Prone Support Walkers (Models 3A To 3E)
The Prone Support Walkers, models 3A through 3E, are ergonomically designed prone standers and walkers for children and adults. These mobility orthoses are made of institutional grade materials including a sturdy frame with steel legs, an oak tie bar, 4 indoor outdoor enclosed urethane casters, and a Plastazote cushioned upper trunk support. The saddle and chest support adjust to angles from 90 to 45 degrees and are designed to encourage various amounts of independent upright weight bearing acro
Rifton Prone Stander Large (E950)
The Rifton Prone Stander Large, model 950, is a prone stander designed to accommodate children and adults 52 to 72 inches tall with mobility or neurological disabilities. The stander includes a padded trunk board on a mobile frame with four locking casters, trunk laterals, hip strap, and an adjustable footboard. A hand-crank tilts the board from vertical to horizontal and the board can be secured at any angle. The removable, padded support blocks adjust to any position along the length of the bo
Rifton Prone Stander Medium (Model E940)
The Rifton Prone Stander Medium, model E940, is a prone stander designed to accommodate children and adults 44 to 59 inches tall with mobility or neurological disabilities. The stander includes a padded trunk board on a mobile frame with four locking casters, trunk laterals, hip strap, and an adjustable footboard. A hand-crank tilts the board from vertical to horizontal and the board can be secured at any angle. The removable, padded support blocks adjust to any position along the length of the
Rifton Prone Stander Small (Model E930)
The Rifton Prone Stander Small. model E930, is designed to accommodate children with mobility or neurological disabilities 25 to 48 inches tsll. The stander includes a padded trunk board on a mobile frame with four locking casters, trunk laterals, hip strap, and an adjustable footboard. A hand-crank tilts the board from vertical to horizontal and the board can be secured at any angle. The removable, padded support blocks adjust to any position along the length of the board. The casters are non-m
Sammons Preston Tugs Pediatric Prone Stander (Model 4617A)
The Sammons Preston Tugs Pediatric Prone Stander, model 4617A, is a prone and supine stander designed for use by children with mobility disabilities. This stander is designed to keep children 25 to 48 inches tall in a prone position. Features include a fully vertical adjustable mainboard, knee board and footboard. Other features include a hand crank that provides quick and easy angle adjustments and nonslip, removable support pads that move to any position along the length of the board. Interna
Seahorse Sanichair
The NRS Seahorse Sanichair® is a 3 in 1 toilet, commode, and shower chair for children with limited upper extremity strength and coordination associated with cerebral palsy, stroke or muscular dystrophy. This multi-functional chair consists of a contoured seat, water and chip resistant metal frame, and large castors for added safety. It has a removable splash guard pommel for added comfort and the easy tilting mechanism and tilt locking make it ideal for bathing your child. It has a large capaci
Standing Frame
CUSTOM ADAPTATION PURPOSE: To provide a child with global developmental delays and low muscle tone with forward-leaning support while standing. This prone stander enables the child to be upright and to develop a tolerance for weight-bearing. Built to a therapist's specifications, the stander provides forward-leaning support and can be adjusted from upright to 30 degrees from vertical. The unit has a square tube steel frame, a wooden trunk support and footplate, fabric-covered foam padding, ches
Standing Frame Adaptation Of The Lazy Squirrel
CUSTOM ADAPTATION PURPOSE: To provide a customized standing frame for children unable to stand unaided. A standing frame allows children to be upright, thus assisting with digestion, circulation, and breathing. Children can also bear their own weight, which may assist in developing bone density, limb coordination and strength. The standing frame designed suggested is the “Lazy Squirrel” or “Squirrel” for short. The Squirrel is designed to provide well-supported vertical standing. It has a plyw
Superstand & Superstand Youth
The Superstand and Superstand Youth are standing frames designed for use by children with neurological, lower extremity, balance, or mobility disabilities or spinal cord injury. This pediatric standing system supports children in prone, upright, or supine positions. The Superstand fits children from 26 to 48 inches tall and Superstand Youth fits children from 40 to 60 inches tall. Each unit comes with a headrest, chin rest, knee and foot support, and a rolling base with four 3-inch casters. The
Supro
Supro is a supine stander that has been designed for children from 2 years to young adult who need to develop and maintain their ability to weight bear through their lower extremities. It offers full posterior body contact and is suitable for users with little or no head control. The Supro provides the option of supine, prone and vertical standing in one frame. Its design gives an angle range of 90° allowing it to achieve a horizontal and vertical position. By removing the head support, re-fixin
Theradapt Mini-Prone Stander
The TherAdapt Mini-Prone Stander is designed to provide early intervention aged children with appropriate support for weight bearing and anti-gravity orientation. The unit is free-standing and adjusts in 10 degree increments from 10 to 30 degrees back from vertical. The rounded chest plate with trunk pad, measured from the foot plate, is height adjustable from 20 to 26 inches. The padded knee bar adjusts from 5.5 to 10 inches. The stander has two separate 1-inch hook and loop adjustable pelvis
Theradapt Primary Prone Stander
The TherAdapt Primary Prone Stander is designed to provide early grade school aged children with appropriate support for weight bearing and anti- gravity orientation. (A smaller Mini-Prone Stander is also available - see separate entry.) The unit is free-standing and adjusts in 10 degree increments from 10 to 30 degrees back from vertical. The rounded chest plate with trunk pad, measured from the foot plate, is height adjustable from 27 to 34 inches. The padded knee bar adjusts from 6.5 to 12.5
Tiltables By R82
The Tiltables by R82 are powered and manual standers that convert to supine, prone, or upright standers and tilt tables designed for use by children and adults with mobility disabilities. All units include trunk support strap, individual height- and angle-adjustable foot supports, and locking casters. Each table provides 90- to 185-degree surface angle adjustment. The tables are available in three sizes, and sizes 2 and 3 are available with or without motorized power tilt; size 1 is available as
Tumble Forms Tristander 45 (Model 4525S) & Tristander 58 (Model 4530S)
The Tumble Forms TriStanders 45, model 4525S, and Tristander 58, model 4530S, are prone, supine, and vertical standers designed to provide versatile standing options for children. Both standers combine the stability of a tubular steel frame with the comfortable firm foam positioning modules by Tumble Forms. Foot-operated pneumatic tilt mechanisms adjusts the standing angle from 15 to 90 degrees, allowing the standers to be used in vertical, prone, and supine positions. The adjustable module cush
Whirl
The Whirl is a prone stander designed to provide symmetry and enable children from 1 year to young adult to gradually develop and maintain their ability to weight bear through their legs and feet while standing. The Whirl is a modular design that enables the changing of any of the chest, pelvic, knee or footrest components without changing the main frame. The Whirl comes complete with anterior and pelvic supports, knee cups, cocoon sandals, activity tray, bowl and cover as standard. POWER: Avail
Whirl Terzo
Whirl Terzo is a stander suitable for children from 12 months of age to young adult who require support while standing. It is designed to promote independence and encourage inclusion to help the user interact with their peers. The Whirl Terzo can be used in the home and school environments. It comes complete with anterior, pelvic and knee supports, cocoon sandals and activity tray. In addition, the Whirl Terzo is equipped with a 10° tilt to assist in achieving an optimum standing position. POWER