Computer Mounting Kit for Wheelchair
Results: 32
Daessy Mini Adjustable Mount (Model M75-Am)
The DAESSY Mini Adjustable Mount, model M75-AM, is a stand for a tablet computer and a computer mounting kit for wheelchair designed for use by individuals with use of only one hand, or mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The system has several points of adjustment to set up and position the mount. Two rotating joints can be angled and twisted in various directions to adjust the horizontal tube position. The system is supported on the wheelchair by a
Daessy Mini Bent-Tube Mount (Model M75-Btm)
The DAESSY Mini Bent-Tube Mount, model M75-BTM, is a stand for a tablet computer, switch mounting hardware and a computer and communicator mounting kit for wheelchair designed for use by individuals with use of only one hand, or mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The mount is non-directional and can be installed on either side of the wheelchair. This product also can be removed from the wheelchair when not needed. The frame clamp assembly includes a
Daessy Mini Folding Mount (Model M75-Fm)
The DAESSY Mini Folding Mount, model M75-FM, is a stand for a tablet computer, switch mounting hardware and a computer and communicator mounting kit for wheelchair designed for use by individuals with use of only one hand, or mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The mount is non-directional and can be installed on either side of the wheelchair. The system folds the horizontal tube down to the outside. The folding joint between the two mount tubes brin
Frs 3-D Folding Wheelchair Mount
The FRS 3-D Folding Wheelchair Mount is a communicator mounting kit for wheelchair or scooter designed for use by individuals with communication and mobility, neurological or severe physical disabilities. Designed for use with the ComLink communicators (see separate entries), this flexible mount system is available with a variety of frame clamps to allow attachment to most wheelchair or scooter configurations. The ComLink communicator attaches to the mount by sliding the communicator's mount pla
H-18 Magic Arm
The H-18 Magic Arm is a mounting kit for tablet computers, communicators, or ebooks, an adjustable ebook holder and a stand for a tablet computer designed for use by people with grasping, neurological or upper extremity disabilities, cerebral palsy or arthritis. The H-18 includes the Super-Clamp which allows clamping to wheelchairs, bedrails, desks or tables; and an iPad tablet holder without case or an adjustable tablet holder (ATH) for other devices or tablets such as the Auggie or Super-Auggi
H-57 Mini-Arm For All Ipads
The H-57 Mini-Arm is a stand for tablet computer designed for use by individuals with use of one hand, grasping or upper extremity disabilities, or arthritis. The H-57 is designed for use with the Apple iPad and other tablets. It includes the Super-Clamp (which allows clamping to wheelchairs, bedrails, desks or tables) and an iPad tablet holder without a case or an adjustable tablet holder (ATH). The user can select a standard, tall, or tall and wide ATH. The tablet can be removed from the holde
H-80 Short Arm
The H-80 Short Arm is stand for tablet computer and an adjustable ebook holder designed for use by people with grasping, neurological or upper extremity disabilities, cerebral palsy or arthritis. The H-80 includes the Super-Clamp (which allows clamping to wheelchairs, bedrails, desks or tables) and an iPad tablet holder without case or an adjustable tablet holder (ATH) for other devices/tablets such as Auggie/Super-Auggie (see separate entries), Barnes and Noble Nook, and Amazon Kindle. The user
H-92 Phone Holder
The H-92 Phone Holder is a cell phone holder and tablet computer mounting system designed for use by individuals with upper or lower extremity, grasping and mobility disabilities, individuals with use of one hand, and wheelchair users. The Phone Holder’s gel case attaches to the “Quick Connect” lever which screws into the end of a Short, Mini, Articulating, Magic Arm or Super Clamp (see separate entries). The screw size is 1/4-20. The Phone Holder expands from 1.625 to 4.5 inches. The “Quick-Con
In Your Face Viewbase
The In Your Face Viewbase is a mounting kit for smartphones and other handheld devices that can be used by individuals with upper extremity or grasping disabilities. The unit consists of a flexible gooseneck with a lower clamp for attaching to a table, wheelchair, plane tray, or other support, and an upper clamp for holding the device. The top clamp is spring-loaded, allowing the smartphone to be inserted and removed. The clamp provides a padded and secure tight grip that fits all iPhone and iPo
Ipad Mount
---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a customized iPad mount for an electric wheelchair for individuals with mobility disabilities and spinal cord injuries, including people with quadriplegia. A quadriplegic used a computer to organize his activities such as painting, filmmaking, counseling, and motivational speaking. Laptops do not easily mount onto the electric wheelchair, and when the iPad became available, this individual jumped at the chance. Working with TADNSW an iPad b
Ipad Mounting System (Model 1556)
The iPad Mounting System, model 1556, is a stand for a tablet computer and a computer mounting kit for wheelchair designed for use by individuals with use of only one hand, or mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The system is composed of three parts: a mounting platform for the iPad, a mounting arm, and a clamp. Two flexible cords that securely hold the iPad to the platform are included. The light duty mounting arm expands from 14.5 inches to 24 inch
Loc-Line Echo Dot Bracket
The Loc-Line Echo Dot Bracket is a do it yourself device designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. This bracket is intended to support the weight of the Amazon Echo and DOT with a ½ inch Modular Hose, Loc-Line tube and a clamp so that the Dot can be positioned closer to the user.
Modularhose.com Assistive Technology Double Kit (Model 90655)
The ModularHose.com Assistive Technology Double Kit, model 90655, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes preassembled and includes 6 feet of
Modularhose.com Assistive Technology Double Spring Clamp Kit (Model 90674)
The ModularHose.com Assistive Technology Double Spring Clamp Kit, model 90674, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit includes a 4 x 6 inch plat
Modularhose.com Assistive Technology Kit (Model 90650)
The ModularHose.com Assistive Technology Kit, model 90650, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes preassembled and includes 3 feet of Loc-Li
Modularhose.com Assistive Technology Kit Plus (Model 90652)
The ModularHose.com Assistive Technology Kit Plus, model 90652, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes preassembled and includes 6 feet of L
Modularhose.com Assistive Technology Kit With Two Plates (Model 90654)
The ModularHose.com Assistive Technology Kit with Two Plates, model 90654, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes preassembled and includes
Modularhose.com Assistive Technology Spring Clamp Kit (Model 90673)
The ModularHose.com Assistive Technology Spring Clamp Kit, model 90673, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit includes a 4 x 6 inch plate, 2 5.75
Modularhose.com At Ipad Kit (Model 90670)
The ModularHose.com AT iPad Kit, model 90670, is a stand for a tablet computer and a computer mounting kit for wheelchair designed for use by individuals with use of only one hand, or mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The system can be used with iPad 1 and iPad 2. The kit comes with an iPad holder with a silicon edge for protection and grip, an integrated fixed mount plate attached to the iPad holder, 2 spring clamps with integrated fixed mount, 2
Modularhose.com At Starter Kit (Model 90680)
The ModularHose.com AT Starter Kit, model 90680, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes with all the common parts used in the assistive tec
Modularhose.com Round Tube Clamp Kit (Model 90750)
The ModularHose.com Round Tube Clamp Kit, model 90750, is a computer or communicator mounting kit for wheelchair or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The kit is intended to be used with Loc-Line 1-inch or 0.88-inch diameter tubing. Plates are made of stainless steel. The kit includes five-piece round tube clamp with knob, Loc-Line connector, Loc-Line double socket f
Modularhose.com Spring Clamp Kit With Plate 1 Foot (Model 90665)
The ModularHose.com Spring Clamp Kit with Plate 1 Foot, model 90665, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit includes a round plate connected to a
Modularhose.com Spring Clamp Kit With Plate 2 Feet (Model 90667)
The ModularHose.com Spring Clamp Kit with Plate 2 Feet, model 90667, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit includes a round plate connected to a
Mount 'n Mover
The Mount 'n Mover is a wheelchair mounting kit for communicators, tablet or laptop computers, or a camera mount for wheelchair designed for use by individuals who use wheelchairs. The device can also be used to mount trays, easels, reading stands, remote controls and more. Available in single- or dual-arm horizontal models, the device is equipped with a quick-release mounting plate offering 0 to 90 degrees of tilt, a paddle to unlock the wrist joint to rotate the attached tray or device, and a
Mount'n Mover Dual Arm Wheelchair Mounting Systems
Mount'n Mover Dual Arm Wheelchair Mounting Systems offers flexible mount, versatile positioning, and custom lock positions. It locks securely, but is easily unlocked and moved. Easy access levers and one-handed actuation require low effort and less reach. Use for iPad, laptop, speech devices, and more. The Dual arm features 3 rotational joints, referred to as the shoulder, elbow and wrist. Full extension of 15 - 18 inches from shoulder to wrist joint. Tilts from 0 to 110 degrees. Table clamp all
Ram Mounts Ez-On/off Flexible Seat Clamp Mount
The RAM Mounts EZ-ON/OFF Flexible Seat Clamp Mount is a stand for a tablet computer, cell phone holder and a computer mounting kit for wheelchair designed for use by individuals with use of only one hand, or mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This mount consists of a universal mount with clamp and 2.5-inch diameter ball base, an 18-inch flex rod, a single socking mounting system, and a custom high strength composite non-locking cradle holder for the
Seasucker Ipad Mounting System
The SeaSucker iPad Mounting System is a stand for a tablet computer and a computer mounting kit for wheelchair designed for use by individuals with use of only one hand, or mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The system requires no bracket for the iPad; it has a 4.5-inch diameter vacuum mount that attaches to the back of the iPad. This mount attaches to a flexible RAM arm that can be moved to position the iPad as needed. The arm attaches to a second
Tecla DOS Mount
The Tecla DOS Mount is intended for anyone seeking hassle-free installation, mounting, and recharging of their Tecla Shield. It can secure the Tecla Shield to a bed, wheelchair, desk or any tube or flat surface that's up to 1.4 inches thick. To use, the user will align the Tecla Shield to the Mount until the magnetic contacts snap into place.
Tecla Switch Kit
The Tecla Switch Kit is intended for wheelchair users who can access a light-touch switch. The Tecla Switch Kit is a good option for wheelchair users who do not have an environmental control unit in their wheelchair but want to access and control their smartphone or tablet. The Tecla Swtich Kid includes:
Tilt'n Turner
The Tilt 'n Turner is a communicator or computer mounting kit for wheelchair or a camera mount for wheelchair designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. The device can also be used to mount trays, easels, reading stands, remote controls and more. The device is equipped with a quick-release mounting plate offering 0 to 90 degrees of tilt and a paddle to unlock the joint to rotate the attached tray or device 360 degrees. There are 12 memor
Tough-Claw™ Mount for Xbox Adaptive Controller
The Tough-Claw™ Mount for is a mountable component for the Wheelchair Seat Mount for Xbox Adaptive Controller. It can be used to offer more flexibility to users making use of the Adaptive controller.
Wheelchair Seat Mount for Xbox Adaptive Controller
The Wheelchair Seat Mount for Xbox Adaptive Controller is a mountable arm that attaches to wheelchairs, rails, bars, and flat surfaces to enable use of the Microsoft Xbox Adaptive controller for people with mobility, fine motor, or upper extremity disabilities. The controller attaches directly to the included RAM® diamond base adapter with 1.5-inch ball and double socket swivel arm, allowing for a 90-degree tilt so users can angle the adaptive controller exactly where needed. When the Xbox Adapt