bruno-independent-living-aids
Results: 19
Carony Transportation System
Carony is a transport wheelchair base designed for use by individuals with severe physical disabilities or mobility disabilities who have difficulty entering and exiting minivans, pickup trucks, and full-size vans. The system operates in conjunction with a Bruno Turny or Turnout powered seat base. The user glides along a rail from the vehicle seat onto the wheeled base, remaining seated the whole time. A hand control glides the seat out of the vehicle then lowers the seat. The Turny or Turnout p
Bruno Turning Automotive Seating (Tas) 2400 & 2400E Package
The Bruno Turning Automotive Seating (TAS) 2400 Turnout is a swivel seat base designed for use by individuals with mobility disabilities who have difficulty getting in and out of a car or minivan. The Turnout is installed on a vehicle-specific custom base plate assembly. The swivel base is engineered for ease of installation and use. The seat pivots out and over the door still and is available for both the driver and the passenger side. The 2400 has manual turnourt and the 2400E has powered tur
Bruno Turnout Turning Automotive Seating (Model Tas-2400/2400E)
The Bruno Turnout Turning Automotive Seating, model TAS-2400/2400E, is a swivel base designed for use by individuals with mobility disabilities who have difficulty getting in and out of a car or minivan. The unit is installed on a vehicle-specific custom base plate assembly and is available in a manual (TAS-2400) or powered (TAS-2400E) model. The seat rotates out over the doorsill, bridging the gap for a safe transfer onto the seat. Once the user is on the seat, it rotates back into the vehicle.
Bruno Big Lifter (Model Vsl-570)
The Bruno Big Lifter, model VSL 570, is a wheelchair and scooter loader designed for use at the rear of minivans, sport utility vehicles, and full size vans. The Big Lifter's manual swing has a low-resistance design, requiring minimum strength. Installation requires no structural modification. The adjustable low-profile arm allows the placement of larger power bases into smaller vehicle openings. A Bruno Custom Base provides for mounting the lift in the appropriate location. POWER: Big Lifter is
Bruno Offset Space-Saver (Model Asl-350)
The Offset Space-Saver, model ASL-350, is a trunk-mounted scooter loader designed to load a partially assembled three-wheel scooter in the trunk of a car. The offset design of the lift arm allows the user to position the scooter inside narrow trunk openings. All controls are located on top of the lift arm. The unit disassembles with three steps and can be stored in the vehicle or in the trunk. When an additional tower base assembly is ordered, the loader can be used in more than one vehicle. CAP
Bruno Electra-Ride Ii (Model Sre-1550)
The Bruno Electra-Ride II is a straight rail interior seat lift designed for individuals with mobility disabilities and cognitive disabilities. The Electra-Ride II can be installed on either side of the stairway. There is a final end stop bumper at each end of rail. Adjustable speed control up to 32 feet per minute; actual loaded top speed is 28 feet per minute. SEAT: The seat width adjusts from 16 to 20 inches between the armrests, and the seat depth is 14 inches. The seat rotates, locking at
Bruno Electra-Ride Elite
The Bruno Electra-Ride Elite is a straight rail interior seat lift designed for use by individuals with mobility disabilities and cognitive disabilities. The Electra-Ride has a 45- and 90-degree locking swivel seat at the top and the bottom of the stairway. The height-adjustable seat is equipped with an adjustable footplate with a safety sensor, flip up arm rests, and a retractable seatbelt. This lift can be installed on either side of the stairway, to within five inches of the wall. POWER: Us
Bruno Electra-Ride Lt (Model Sre-2700)
The Bruno Electra-Ride LT, model SRE-2700, is a straight rail interior seat lift designed for use by individuals with mobility disabilities and cognitive disabilities. The LT has a rack and pinion drive system will sense and automatically stop when obstacles are encountered. The seat and arms of the carriage flip up out of the way when the unit is not in use. The swivel seat locks for getting on or off. The rocker switch control is conveniently located at the end of the arm rest. The two wireles
Bruno Electra-Ride Iii (Model Cre-2110)
The Bruno Electra-Ride III, model CRE-2110, is a custom rail interior seat lift designed for individuals with mobility disabilities and cognitive disabilities. The stairlift rail can be installed as close as 7 inches from the wall. The unit anchors to the steps, not the wall. Tight radius inside turns fit typical bi-level houses. The tight turn and narrow rail will keep the majority of the staircase free of obstruction. The height-adjustable seat swivels and locks at 45 degrees (bottom), 0 degre
Back-Saver Vehicle Lift (Model Awl-1600)
The Back-Saver Vehicle Lift, model AWL-1600, is a bumper-mounted wheelchair carrier designed to transport a folding wheelchair on an automobile with limited trunk or interior space. The automatic, motorized lift secures the folded wheelchair against the rear bumper, latching on the arms and supporting the rear wheels (22 inches in diameter or larger) in brackets. The lift includes an emergency safety latch and a state and federally approved license plate holder. CAPACITY: Carries wheelchairs wei
Space Saver Take-Apart Scooter Lift (Model Asl-325)
The Space-Saver Take-Apart Scooter Lift, model ASL-325, is a trunk mounted wheelchair alternative loader for persons with mobility disabilities using scooters. The lift raises and stores scooters in cars with limited trunk space. It is height and length adjustable to fit any trunk size, and can lift scooters weighing up to 200 pounds. The Space-Saver is easily assembled and disassembled in three simple steps, with the heaviest part weighing just 13.5 pounds.
Curb-Sider (Model Vsl-6000)
The Curb-Sider, model VSL-6000, is a trunk-mounted wheelchair alternative loader for persons with physical disabilities needing to transport power wheelchairs or scooters. This fully-powered lift fits most types of vehicle, including minivans, SUVs, CUVs, pickup trucks, and full-size vans. It is available for either the passenger or driver side, and its offset arm can pick up wheelchairs or scooters from the rear of the vehicle, from the rear corner, or from the side of the vehicle (near the rea
Out-Rider Vehicle Lift (Model Pul-1100)
The Out-Rider Vehicle Lift, model PUL-1100, is a wheelchair loader for pickup trucks designed to lift and store fully assembled scooters and manual wheelchairs behind the driver's cab of a full-size, mid-size, or king cab pick-up truck. The wheelchair lift can be mounted on the truck just behind the cab on either the driver's side or the passenger's side. A "docking device" is attached to the wheelchair; different devices are used for standard wheelchairs and for wheelchair alternatives. For sta
Bruno Elan (Model SRE 3000)
The Bruno Elan, Model SRE 3000, is a straight rail indoor stairlift designed for individuals with mobility disabilities, balance disabilities, or lower extremity disabilities. It has a padded, offset swivel seat that is both foldable and height-adjustable; flip-up footrest and armrests; obstruction safety sensors; and a seatbelt. The Elan also features two wireless call/send buttons that allow the unit to be controlled remotely, an armrest rocker switch, and an anodize rail with a covered gear r
Joey (Model: VSL-4400)
Joey (Model: VSL-4400) is an interior platform-style scooter powerchair lift designed for people with severe physical disabilities, mobility disabilities, spinal cord injury and other mobility impairments that require the use of a scooter. A user can drive their mobility device onto the platform, press a button and Bruno's Joey lifts the scooter or powerchair into the vehicle and stows it in the cargo area.
Curb-Sider (Model: VSL-6000/VSL-6900)
Curb-Sider (Model: VSL-6000/VSL-6900) is a hoist-style scooter and powerchair lift designed for people with severe physical disabilities, mobility disabilities, spinal cord injury and other mobility impairments that require the use of a scooter. The Curb-Sider's design lets users keep third-row seating when a mobility device isn't present in most vehicles. To use the device a user stands by the bumper, connects a docking device, pushes a button and the Curb-Sider lifts and stows the mobility dev
Out-Sider (Model ASL 275)
Out-Sider (Model ASL 275) is an exterior-style scooter and powerchair lift designed for people with severe physical disabilities, mobility disabilities, spinal cord injury and other mobility impairments that require the use of a scooter. The device mounts to the tow-hitch of a vehicle and can be transferred to any vehicle with a hitch. It leaves a user’s cargo space available, and an additional “swing-away” option can be added to the lift.
Chariot (Model: ASL-700)
Chariot (Model: ASL-700) is an exterior-style scooter and powerchair lift and trailer designed for people with severe physical disabilities, mobility disabilities, spinal cord injury and other mobility impairments that require the use of a scooter. The device mounts to the tow-hitch of a vehicle and can be transferred to any vehicle with a hitch. It leaves a user’s cargo space available. The Chariot's independent suspension carries the load's weight and 360-degree spinning wheels make it simple
Lifter (Model: AWL-150)
The Lifter (Model: AWL-150), is a trunk mounted wheelchair loader designed to lift and store manual folding wheelchairs into most models of automobiles, station wagons, hatchbacks, SUVs, or pick-up trucks that have sufficient room to store the chair. The lifter is made of steel tubing, and has a T-bar docking device that attaches to the mobility aid. The T-Bar detaches and the lift arm folds for storage. The unit lifts the chair up when the switch is activated and gently guides the lift arm and