tubular-specialties-manufacturing-inc-tsm
Results: 19
Combination Aid Rail (Model 1632)
The Combination Aid Rail ##1632 is a stainless steel wall mounted grab bar for use in bathtubs or showers. The support consists of an L-shaped bar that mounts in two places on the vertical side, and one on the horizontal side. The grab bar is available in exposed mounting styles and 4 concealed mounting styles. The rail comes in right or left hand configurations. DIMENSIONS: 16 x 32 inches with 1, 1.25, or 1.5 inch diameter tubing. Safety wall clearance is 1.5 inches. FINISH: Brushed Satin is st
Wall Mounted Tub Rail (Model 2040)
The Wall Mounted Tub Rail ##2040 is a stainless steel grab bar for use in bathtubs. The support consists of an L-shaped bar designed for mounting in the corner of the walls of the tub area. This rail is available in 4 concealed and 4 exposed mounting styles, and can be mounted for either right or left handed use. DIMENSIONS: 36 x 48 inches with 1, 1.25, or 1.5 inch diameter tubing. Safety clearance is 1.5 inches. FINISH: Standard finish is Brushed Satin; optional finishes include non-slip safety
Tub / Shower Bar (Model 3636-V)
The Tub/Shower Bar ##3636-V is a stainless steel wall mounted grab bar for showers and bathtubs. The support consists of an L-shaped horizontal bar that provides a grab surface on the back and side walls, and a connected vertical bar for additional hold when entering or leaving the bathing area. The bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS: 32 x 36 x 32 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Brushed Sati
Horizontal Tub Bar With Vertical Arm (Model 2040-V/vm)
The Horizontal Tub Bar with Vertical Arm is a stainless steel wall mounted grab bar for bathtubs. The support consists of a horizontal bar with an L- shape to fit to the corner of the side and back walls of the tub, and a vertical bar for additional hold when entering or leaving the bathing area. The bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS: 40 x 20 x 32 inches (##2040- V) or 24 x 48 x 32 (##2040-VM with center mounting) w
Horizontal Shower Bar With Vertical Arm (Model 2424-V)
The Horizontal Shower Bar with Vertical Arm ##2424-V is a stainless steel wall mounted grab bar. The support consists of a horizontal bar with an L- shape to fit the corner of the shower and a vertical bar for additional hold when entering or exiting the shower. The bar is available in 4 concealed or 4 exposed mounting styles. DIMENSIONS: 24 x 24 x 32 inches with 1, 1.25, or 1.5 inch diameter tubing. Safety wall clearance is 1.5 inches. FINISH: Brushed Satin is standard; optional finishes includ
Wall Suspended Tub Rail (Model 1236)
The Wall Suspended Tub Rail ##1236 is a stainless steel wall mounted grab bar for bathtubs. The support consists of a U-shaped bar with 2 mounting points, and 2 L-shaped extension arms that are attached to the underside of the hand bar and mount to the wall. This grab bar is available in 4 concealed or 4 exposed mounting styles. DIMENSIONS: 36, 40, 42, or 48 inch crosspieces; hand bar extends from wall 12 inches; extension arms are 8 x 12 inches. FINISH: Brushed Satin is standard; optional finis
Floor Mounted Tub Rail (Model 3236)
The Floor Mounted Tub Rail ##3236 is a stainless steel wall to floor grab bar for the bathtub. The support consists of a U-shaped hand bar that mounts at two points to the wall, and two vertical bars attached to the underside of the hand bar that extend to and mount in the floor on either side of the tub. Due to this construction, this model may be especially suited for island tubs. This grab bar is available in 4 concealed or 4 exposed mounting styles. DIMENSIONS (WxDxH): 36,40, 42, or 48 inch
Corner Mounted Tub Rail (Model 3236-C)
The Corner Mounted Tub Rail ##3236-C is a stainless steel wall to floor grab bar for bathtubs. The support consists of an L-shaped horizontal hand bar that attaches to the side and back walls of the tub, and a vertical bar that attaches to the underside of the hand bar and mounts in the floor on the outside of the tub. This grab bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS (WxDxH): 36, 40, 42, or 48 inch crosspieces x 12 x 32
Tub Entry Bar (Model 2010)
The Tub Entry Bar ##2010 is a stainless steel floor mounted grab bar for bathtubs. The bar is designed to be mounted on the outside of the tub to provide two handed support, and consists of one U-shaped tube double-angled to form a support that extends vertically to the edge of the tub, horizontally over the tub wall, and down again inside the tub. This support is available in 4 concealed or 4 exposed mounting styles. DIMENSIONS: 20 (H, outside tub) x 9 (D) x 18 (W) x 10 (H, inside tub) inches w
Boomerang Bar (Model 1220)
The Boomerang Bar ##1220 is a stainless steel wall grab bar for use in a shower or bathtub, or by a toilet. This support consists of a half diamond shaped bar bent at 110 degrees, that mounts to the wall in two places at the ends. This bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS: Each side is 12 inches, with 20 inches separating the two ends; 1, 1.25, or 1.5 inch diameter tubing. Safety wall clearance is 1.5 inches. FINISH: B
Hockey Stick Bar (Model 832)
The Hockey Stick ##832 is a stainless steel wall mounted grab bar that can be used in bathtubs and showers, or next to toilets. The support is shaped in the form of a hockey stick with a longer vertical bar and a shorter horizontal bar that attaches to the wall in two places at the ends. The bar is bent at 97 degrees to create these two sides. The bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS: 32 x 8 inches with 1, 1.25, or 1.5
Inclined Aid Rail (Model 2245)
The Inclined Aid Rail ##2245 is a stainless steel wall mounted grab bar for use in bathtubs and showers, or by toilets. This support is a straight bar that attaches to the wall at both ends. It is available with 4 concealed or 4 exposed mountings, and, when diamond shaped mountings are ordered, is available in right or left hand configurations. When mounted at a 45 degree angle with 22 5/8 inch centerline, this bar is designed to exactly hit building studs 16 inches apart. DIMENSIONS: 22 5/8 inc
Arm Support Aid Rail (Model 3033)
The Arm Support Aid Rail ##3033 is a stainless steel wall to floor grab bar for use next to a toilet. The support consists of an L-shaped bar with an extension arm that gives added stability to the vertical bar. This grab bar is available in 4 concealed or 4 exposed mountings, and in right or left hand configurations. DIMENSIONS: 30 (L) x 33 (H) inches with 5 (L) x 12 (H) inch extension arm. FINISH: Brushed Satin is standard; optional finishes include non-slip grips, metallic plating, and electr
Wall To Floor Bar With 3-Inch Extension (Model 3303-Wx)
The Wall to Floor Bar with 3-inch Extension ##3303-WX is a grab bar for use next to a toilet to give support and balance to persons who need it when standing or sitting. This is an L-shaped bar that extends below floor level an additional 3 inches. Manufacturer recommends use with concrete floors only. This grab bar is available in 4 concealed or 4 exposed mounting styles. DIMENSIONS: 33 (H) x 30 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Brushed Satin is standard; optional finish
Grab Bar Series
Wall mounted stainless steel grab bars. Standard and custom styles available.
Wall To Floor Grab Bar
The Wall to Floor Grab Bar is designed to assist individuals with balance or mobility disabilities by providing support while walking or standing/sitting.
Fixed Position Shower Seat (Models 712 & 712H)
Corner mounted shower seat of 16 gauge stainless steel, satin finish. Overall dimensions are 15 1/2 inches by 15 1/2 inches by 22 inches with 1 inch lip. Seat height determined by wall mounting. Model 712h ($188.95) is hinged.
Shower Seat For Wheelchair Transfer (Models 710A & 710T)
Wall mounted stainless steel shower seat with tubular frame, folds flat against wall. L shape to provide easy transfer. Teakwood or Naugahyde covered 2 inch foam cushion over plywood base. Seat dimensions are 32 inches by 20 inches by 13 inches. Seat height is determined by wall mounting. Right or left available.
Retractable Shower Seat (Models 703 & 703T)
Wall mounted stainless steel shower seat with tubular frame, 2 legs angle into wall for rigid support. When seat is retracted, legs fold against wall. Teakwood seats or Naugahyde covered foam cushion. Seat dimensions are 14 inches by 16 inches. Seat height is 19 inches.