Reacher
Results: 81
Ableware 769600110 Omnigrip Reacher - 30"
Omnigrip Reacher - 30" it's designed for people with grasping instabilities. It requires at least some hand strength to operate. A unique locking mechanism allows a continuous hold on an item without applying pressure on the trigger. The jaw is easily adjusted to any of four up/down positions and any of four axial positions to achieve the best angle for use whether sitting, standing, or lying down. A magnet on the jaw picks up needles and nails. Removable wrist support adds balance and control f
Active Heavy-Duty Reacher (Models Sw5126, Sw5127, & Sw5128)
The Active Heavy-Duty Reacher is designed for use by individuals with mobility disabilities. Designed to lift heavier objects, this reacher has a straight, bulb-style handle and trigger-activated U-shaped gripping jaws with textured rubber tips for a firm grip. A strong magnet at the end of the handle aids in picking up metal objects. DIMENSIONS: The jaws on all models open to 2 inches. Model SW5126 is 24 inches long, model SW5127 is 28 inches long, and model SW5128 is 31.5 inches long. WEIGHT:
Aid For Closing And Opening Doors From Wheelchairs For Entering And Leaving The Home.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Device to push or pull a door shut from a wheelchair. Aid made of a piece of broom handle or dowel with a crutch tip on one end and a leather loop at the other, which can be hung on a hook by the door. The leather loop hooks around the doorknob to allow the door to be pulled shut without a lot of maneuvering of the wheelchair. SKILLS REQUIRED: Assembly. AUTHOR: Independence Factory TITLE: How to Make it Cheap Manual: Volume 2 REF: Middletown, Ohio: Ind
AliMed® Shoe Aid
The AliMed® Shoe Aid is designed for use by individuals with arthritis, lower extremity or mobility disabilities. This device fits on the users hand and slips over the counter of the shoe, reinforcing it and making it act like a shoehorn. Put the shoe on the floor and maneuver it with the string and insert the foot. A gentle upward tug releases the aid. Pack of 2.
Aluminum E-Z Reach (Models 6366 & 6367)
The Aluminum E-Z Reach is a reacher designed for people who need assistance reaching objects without significant bending or stretching. The reacher can handle objects weighing up to two pounds, but can also pick up a dime or hold a paper cup without crushing it. The reacher has a vertical grip and a voluntary closing and the grasping end has rubber grips. DIMENSIONS: Length, 30 inches (6367) or 20 inches (6366). WEIGHT: 9 ounces.
Arcmate E-Z Reacher
The ArcMate E-Z Reacher is designed to assist individuals with limited reach or who need assistance in reaching objects without significant bending or stretching. This reacher features a plastic handle, a pair of flexible aluminum claws with round rubber suction grips, and an aluminum shaft. The reacher is designed for one-or two-handed use and can hold items weighing up to two pounds. Folding and locking models are available. SIZES: Compact, standard, folding. DIMENSIONS: The standard and fol
Assistive Device Kit (Model A665322)
The Assistive Device Kit, model A665322, is a long-handled sponge, long-handled shoe horn, and a reacher designed for use by individuals with reduced reaching capabilities, including individuals with upper extremity and mobility disabilities. The set includes a standard Handi-Reacher; a round, long-handled sponge; and a long-handled shoe horn.
Basic Hip Kit with 32 inch Ergo Plus Reacher
Basic Hip Kit with 32 inch Ergo Plus Reacher is recommended ADL equipment for patients recovering from hip/knee surgery. It can also help people who suffer from limited motion or arthritis.
Carex E-Z Grabber (Models P605 & P606)
The Carex E-Z Grabber is a reacher designed for use by individuals with upper extremity disabilities. This reacher has a 90-degree rotating arm for grasping objects from above or below. A locking tab holds the item in place for users with limited strength. This reacher also features an EZ Twist Shaft and wrist support. DIMENSIONS: Model P605 is 26 inches long and model P606 is 32 inches long.
Children's Reacher
The Children's Reacher is a reacher designed for use by children who use wheelchairs or who have difficulty bending or stretching.This reacher features a non-toxic baked-on flouroescent finih; asingle, claw-style jaw; an ergonomic pistol grip; and squeeze trigger activation. DIMENSIONS: 15 inches long. WEIGHT: 3.6 ounces.
Complete Hip Kit (Model A665-320)
The Complete Hip Kit is designed for use by individuals who have had a hip replacement or who have mobility disabilities. The kit includes a Savanah Toilet Seat (see also separate entry), a long-handled sponge for bathing, a dressing stick, a long-handled shoe horn, a Sock Notch sock aid to assist in putting on socks without bending, and a standard-size Handi-Reacher (see separate entry). DIMENSIONS: The Savanah Toilet Seat is 4 inches tall,
Cubit Cane
DO IT YOURSELF ENTRY" ----- PURPOSE: To assist individuals with low vision who use powered wheelchairs in reaching elevator call buttons or buttons on the control panel for higher floors. This short cane constructed from parts of damaged canes can be constructed of spare parts from damaged canes and attached to the wheelchair using hook-and-loop strips. Cut a cane grip and shaft to 17 inches. Install a slip-over tip on the end of the shaft, increasing the length to 18 inches. Complete the tool b
Deluxe Gopher
The Deluxe Gopher is a folding reacher designed for use by individuals with mobility or upper extremity disabilities. This folding reacher has trigger activation with a lock to hold items in the jaws. The jaws are equipped with suction cup grips and can lift up to five pounds. The device is aluminum with a plastic handle. DIMENSIONS: 33 inches long.
Dress EZ™
The Dress EZ™ is a shoe horn stick designed for use by individuals with arthritis, lower extremity or mobility disabilities. The device is a two function aid; it can be used as a dressing aid or shoe horn. The Dress EZ is made of soft foam handle with a 1 inch diameter and has a smooth surface with round edges.
Drive Standard Assist 32 Inch Reacher, Model RTLPC23583
Drive Standard Assist 32 Inch Reacher is intended for individuals with limited hand strength or flexibility. It has ergonomically designed trigger for use with the whole hand and it adds 32 inch to arm length to reduce stretching and bending when picking up objects to purposely enhance user's safety.
Easireach II (Models Aa8042 & Aa8043)
The Easireach II is a reacher designed for use by individuals with mobility disabilities. This device enables users to reach items overhead or on the floor without stretching or bending. This reacher features non-slip grasping jaws and a textured pistol grip handle. A magnetic tip aids in picking up small metal items and a post on top of the jaw aids with dressing and pulling objects to the user. A detachable clip secures the reacher to walkers, wheelchairs, bed rails, etc. and a hook on top fa
Easy Driving With Double Duty Reacher.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Reacher for use in a car, developed by a person with arthritis. Reacher made with a 1/2 inch dowel cut to desired length. A rubber chair tip is attached to one end. A 5 inch piece of 3/4 by 1/4 inch finishing board is screwed onto the other end to make a T shape. Can be used to manipulate levers and buttons on the dashboard. SKILLS REQUIRED: Assembly. TITLE: Easy Driving With Double Duty Reacher JOURNAL: Accent on Living REF: Vol 26 no 2, Fall 1981: p
Economy Hip / Knee Kit
The Economy Hip/Knee Kit includes five products designed for use by individuals with upper extremity and mobility disabilities following hip or knee replacement surgery. The kit includes a reacher, shoe horn, sock aid with cords and built-up foam handle, dressing stick and a contoured bath sponge. These devices are designed to help users avoid bending, standing or turning at the hip when bathing, dressing and performing other activities in the home. The kit comes in a plastic bag. DIMENSIONS: Th
Ergonomic Plastic Reacher with Rotating Claw
The Ergonomic Plastic Reacher with Rotating Claw is a reacher designed for individuals who have trouble bending or those individuals confined to a wheelchair to grab objects in hard to reach places. Rotates vertically and horizontally. Rubber tips. Metal magnet to hold small metal objects.
Ergotek Plus 32 inch Folding Reacher
The Ergotek Plus 32 inch Folding Reacher is a folding reacher designed for people with difficulty reaching and bending or for individuals confined to a wheelchair or for individuals with upper extremity disabilities to allow these persons to grab things in difficult places to reach. Can be rotated 90 to 180 degrees.
Essential Folding Reacher (Model P2222)
The Essential Folding Reacher, model P2222, is a reacher designed for use by individuals with mobility or upper extremity disabilities. This reacher has an anodized aluminum shaft, a pistol grip handle, and a trigger-activated claw-style plastic jaw. A magnetic tip aids in picking up metalic objects. The shaft folds in the center for transport and storage. DIMENSIONS: 22 inches long.
Essential Straight Reachers (Models P2226 & P2232)
The Essential Straight Reachers are reachers designed for use by individuals with mobility or upper extremity disabilities. These reachers have anodized aluminum shafts, pistol grip handles, and trigger-activated claw-style plastic jaws. A magnetic tip aids in picking up metallic objects. DIMENSIONS: Model P2226 is 26 inches long. Model P2232 is 32 inches long.
Etac Aktiv Reacher
The Etac AKTIV Reacher is a reacher designed for use by individuals with mobility disabilities or short stature. The handle of the reacher is angled to utilize the strength in the hand and provide an effective grip. There is an index finger support on the handle which gives improved precision. The entire gripping surface of the U-shaped jaws is coated with hard-wearing rubber. The jaws of the reacher can also be set in two positions, allowing the reacher to be used both horizontally and vertical
Etac Aktiv Reacher With Hooks
The Etac AKTIV Reacher with Hooks is a reacher designed for use by individuals with mobility disabilities or short stature. The handle of the reacher is angled to utilize the strength in the hand and provide an effective grip. There is an index finger support on the handle which gives improved precision. The entire gripping surface of the U-shaped jaws is coated with hard-wearing rubber. The jaws of the reacher can also be set in two positions, allowing the reacher to be used both horizontally
Extended reach grabber
Extended Reach Grabber is designed for arthritis, diabetes/diabetic neuropathy, hip pain, total hip replacement, total knee replacement, leg amputation, lower extremity impairments, mobility impairment, multiple sclerosis (MS), neuropathy, traumatic brain injury (TBI), osteoarthritis (weight bearing joints), and degenerative joint disease. It is designed to assist individuals with getting off their lawn mower or climbing a ladder for those hard to reach items. An extended reach grabber will ena
Extra-Long Reacher
CUSTOM ADAPTATION PURPOSE: To enable an individual with spinal cord injury to reach items at the foot of the bed. The handle was cut off an existing reacher with U-shaped gripping jaws. A piece of aluminum tubing was added to extend the length of the reacher and a wire extension was soldered to the wire that activates the jaws when the trigger is squeezed. TITLE: Bedside Computer Stand. JOURNAL: TAD Journal. REF: Volume 26, Number 2, July 2006: p. 10-11. PAGES: 3 (including cover).
Ez Shoe On (Models 365 & 385)
EZ Shoe On (models 365 and 385) are long handled shoe horns that allow the user to grip heel of shoe and pull the shoe on. The shoe horns have trigger action gripand may be used as a combination shoe horn, gripper and reacher. DIMENSIONS: Horns have 20 to 30 inch stalks.
Featherlite Reacher (Models Nc28521 & Nc28522)
The Featherlite Reacher, is designed to assist individuals with limited reach or who need assistance in reaching objects without significant bending or stretching. This reacher features a plastic pistol grip and an aluminum shaft. The trigger control mechanism allows the user to control the width of the opening of the gripper claw, allowing the device to grip both small and large objects. The reacher also features a lug on the top for pulling or pushing objects and a magnet in the tip for pickin
Featherweight Shoehorn Reacher
The Featherweight Shoehorn Reacher is a reacher with integral shoehorn designed for use by individuals with lower extremity or mobility disabilities. This aluminum reacher had a pistol grip with a hook trigger to open the GripCert jaws. The shoehorn extends over the top jaw and up the shaft, creating a long-handled shoehorn. DIMENSIONS: 32 inches long. The jaws are 3 inches wide. WEIGHT: 8 ounces.
Get-A-Grip
Get-A-Grip is a reacher designed for use by individuals with fine motor and grasping disabilities. This long-tweezer-like device can be used to retrieve parking and toll tickets, ATM cards at drive-through banks, horel card keys, and other small objects. DIMENSIONS: 11 inches long.
Grab Reacher (Model Ha-4610)
The Grab Reacher, model HA-4610, is a reacher designed for use by individuals with mobility disabilities. This reacher has a wooden handle with an aluminum squeeze grip and vinyl coated claws, and extends the user's grip by 790 millimeters. It can be used for picking up cans, bottles, boxes, books, or newspapers. To close the claws, the user squeezes the trigger tightly. WEIGHT: 232 grams.
Grab-A-Cane
The Grab-A-Cane is an adjustable offset cane with a built-in reacher designed for use by individuals with balance, mobility or walking disabilities. This height-adjustable cane has an offset foam handle grip with a wrist loop, and just below the handle is a trigger activator for the reacher. The trigger locks when not in use. The gripper jaw is located at the bottom of the cane and extends to the bottom of the rubber cane tip. DIMENSIONS: The height adjusts from 30.75 to 39.75 inches. COLOR: Bla
Grabber
The Grabber is a custom prototype grabber designed for those individuals with spinal cord injuries to pick items up that they dropped, such as a phone or television remote control. It could take Chris up to 20 minutes with a DIY hanger hook. With this prototype, it is initiated by wrist extension (flicking the wrist). In addition to grabbing, the grabber is outfitted with magnets and a hook for added functionality and to grab other items that fall. It was invented at a Tikkun Olam Makers make-a-
Handy Reacher (Models Ha-4601 & Ha-4602)
Handy Reacher is a reacher designed for use by individuals with mobility disabilities. This reacher has a trigger design and may be used for reaching awkward places, picking up objects, or to assist in dressing. WEIGHT: 167 grams (model HA-4601) or 185 grams (model HA-4602).
Helping Hand Shoe Helper / Reacher, The
The Helping Hand Shoe Helper/Reacher is a combination long handled shoe horn and reacher designed for use by individuals with arthritis, hip replacement, and other mobility and lower extremity disabilities. This lightweight anodized aluminum reacher features an ergonomic pistol grip, a curved trigger, a single rubber-lined claw, and an integrated shoe horn attached to the top. The claw secures the shoe and the shoe horn assists in putting on the shoe without requiring the user to bend. The gripp
Hip Kit Iii (Model 665-321)
The Hip Kit III, model 665-321, is a long-handled sponge, long-handled shoe horn, dressing stick, sock aid, and a reacher designed for use by individuals with reduced reaching capabilities, including individuals with upper extremity, hip replacement, mobility disabilities. The set includes a standard Handi-Reacher; a round, long-handled sponge; a dressing stick; a Sock Notch; and a long-handled shoe horn. DIMENSIONS: The Handi-Reacher is 24 inches long. The dressing stick is 26 inches long, and
Mabis DMI 32 Inch Reach Extender with Magnetic Tip, Model 640-1762-0000
Mabis DMI 32 Inch Reach Extender with Magnetic Tip is designed for people with fine motors and mobility disabilities. It helps picking up objects as small as a dime and as large as a quart bottle. Magnet on jaw tip helps pick up lightweight metal.
Mabis DMI Deluxe Reach Extender Hip Kit, Model 641-8177-0000
Mabis DMI Deluxe Reach Extender Hip Kit is designed for those that may need assistance in reaching due to hip surgery, back surgery or anyone with bending or reaching difficulties. The kit is also ideal for those with limited range of motion.
Mailhawk
The Mailhawk is a reacher designed to minimize the risks of painful rupture and serious back damage from daily stretching and straining. The Mailhawk may be used as a high shelf reacher, for retrieving fallen objects, putting on and removing socks and stockings, or for professional use by rural mail carriers and newspaper route carriers. The reacher has a long wooden handle with aluminum jaws. The jaws are covered with plastic tips and are tapered at the ends to grasp small objects. Springs open
Matey Bantam Reaching Aid (Model F76950)
The Matey Bantam Reaching Aid, Model F76950, is an aluminum reacher with pistol trigger hand grip and jaw-style opening. The device features a voluntary closing action; pressure must be maintained to continue grip.
Matey Pocket-Fold Reaching Aid
The Matey Pocket-Fold Reaching Aid, model F76954, is a folding aluminum reacher with pistol trigger hand grip and jaw-type opening. This device features a voluntary closing action; pressure must be maintained to continue grip. A magnet at the tip aids in picking up small metal items. DIMENSIONS: 22 inches long when open; folds to 12.5 inches. 2.5-inch maximum grip. WEIGHT: 6 ounces.
Matey Ranger Reaching Aid (Model F76951)
The Matey Ranger Reaching Aid, model F76951, is an aluminum reacher with pistol trigger hand grip and jaw-type opening. This device features a voluntary closing action; pressure must be maintained to continue grip. DIMENSIONS: 32.5 inches long with 2.5-inch maximum grip. WEIGHT: 8 ounces.
Medline Reacher
The Medline Reacher is a reacher designed for use by individuals with grasping and upper extremity disabilities, including limited reach and hand strength. This reaching aid has a balanced design with a full grip handle allowing the use of all four fingers for greater grip strength. The jaws are latex free and are covered with non-slip rubber tabs over composite jaws that latch onto items securely. DIMENSIONS: Available in lengths of 24, 26.5, 31, and 32 inches.
Metal Reachers
The Metal Reachers are reachers designed for use by individuals with upper extremity or mobility disabilities. These reachers help users grasp items from hard-to-reach places, both above and below the user. The trigger handle pulls the jaw tight and the magnet at the end helps lift small metal objects. The reachers are available in a fixed model and a folding model. DIMENSIONS: The fixed models are available in 32 or 27 inches long. The folding reacher is 26.5 inches long.
Multi-Reach
The Multi-Reach is a reacher designed for use by individuals with lower extremity or mobility disabilities or who have difficulty bending or reaching. Designed for right- or left-handed use, this reacher has trigger-activated pinching jaws that rotate 360 degrees to enable grasping of both horizontal or vertical items. A locking mechanism holds items securely. DIMENSIONS: 32 inches long.
ODii: Telescopic Grabbing Multi-Tool
ODii is a flexible, telescopic grabber designed to help individuals who have mobility disabilities or difficulty bending retrieve items from hard-to-reach places, such as in between the car seat and console, underneath the couch, behind the washing machine, down the drain, etc. The slim, telescopic arm is bendable enough to navigate around awkward angles, and it features a four-pronged claw on one end that is strong enough to pick up items weighing up to ten pounds. The user can control how firm
Original Cripper
The Original Cripper is a reacher or grabber specifically designed for quadriplegics who have wrist function that allows them to bend their hand back at the wrist. It can also be used by any person with grasping, fine motor, neurological or upper extremity disabilities who needs assistance reaching or gripping objects. The Original Cripper is available in Lightweight and Heavy Duty models, and both models are available for the right or left hand in a range of custom sizes. Made with aluminum and
Passive Reacher (Models Sw5136 & Sw5137)
The Passive Reacher is designed for use by individuals with arthritis or mobility disabilities. This lightweight reacher opens softly by squeezing the trigger handle using all fingers and closes with the release of the spring pressure by squeezing again. Small metal objects can be picked up using the magnet at the end of the handle. DIMENSIONS: 24 inches (Model SW5136)or 28 inches (SW5137) long. WEIGHT: 4.5 ounces (SW5136); 5 ounces (SW5137).
Pediatric Reacher
Pediatric Reacher is a lightweight reacher designed for children and adults with small or weak hands. Length and trigger design are the result of human factors studies to create a reacher for small hands and limbs.
Pick-Up Reacher (Models Aa8070, Aa8060, Aa8062, Aa0863 & Aa8073)
The Pick-Up Reacher is a reacher designed for use by individuals with mobility disabilities and limited hand strength. This device enables users to reach items overhead or on the floor without stretching or bending. This lightweight reacher features wire-driven rubber-lined non-slip grasping jaws and a textured pistol grip handle with an ergonomically-designed trigger that is operated with the whole hand, requiring less strength than the traditional two-finger trigger. The jaw rotates 360 degree
Pointer Gripper
Head mounted pointer that has a switch operated gripper on the end. Jaws of gripper release object when switch is opened. The activating switch can be selected according to the capabilities of the user. Mounted on headband, pointer with jaws on end is approximately 10 inches long.
Quad Reacher
The Quad Reacher is fabricated of stainless steel and aluminum. and is designed to allows individuals with limited hand function to reach and pick up assorted items by extending the wrist. DIMENSIONS: Made for either the right or left hand; 20 or 26 inch lengths. WEIGHT: 11 ounces.
Quantum Reacher (Models Nc28555, Nc28556 & Nc28557)
The Quantum Reacher is designed to assist individuals with limited reach or who need assistance in reaching objects without significant bending or stretching. This reacher features a plastic pistol grip, a neoprene-lined plastic claw, and an aluminum shaft. The trigger control mechanism allows the user to control the width of the opening of the gripper claw and to lock the claw in position. The reacher also features a hook on the top for pulling objects or dressing assistance, and a magnet in th
Rainbow Reacher
The Rainbow Reacher is designed for use by children or adults with mobility or bending disabilities and weak grasps. This colorful reacher have suction cups on either side of the sideways opening jaws which eliminates the need to turn the wrist to grasp objects. The extra small handlefits a child's hand or a frail hand and the squeeze-trigger aligns with the handle. DIMENSIONS: The reacher is 16 inches long and the suction cups are 1.5 inches in diameter. WEIGHT: Four ounces.
Raptor, The (Model F76945-0000)
The Raptor, model F76945-0000, is a reacher designed for use by individuals with arthritis, spinal cord injury, or mobility disabilities. This lightweight reacher has a contemporary design, with a contoured grip with a squeeze control for the grasping jaws set at a right angle to the rest of the unit. The jaws can grip small items such as dimes or bulky items such as newspapers, clothing, and cans. A hook-like extension at the front of the reacher can be used as a dressing aid or as a back scrat
Reach Tool
DO IT YOURSELF ENTRYPURPOSE: To create a do-it-yourself high-reach tool with household items. A mop or broom handle serves as the shaft of the reacher. Using a drill, make a small hole in both clamp handles and secure the clamp to the end of a mop handle with a hose clamp. Next, feed cable through the bottom handle and attach to the top of the handle with a carriage bolt. A hole can be drilled through the bolt to better accompany the cable. Secure the cable using zip ties. Finally, attach the c
Reacher
DO IT YOURSELF ENTRY --- PURPOSE: To provide a person with grasping or other upper extremity disabilities with a method of retrieving metal objects or objects with handles that were otherwise out of reach. Attach a hook to one end of a wooden dowel, and attach a magnet to the other end of the dowel. MATERIALS: Wooden dowel (length determined by the user); hook; magnet; and glue. TITLE: Doing It Yourself. AUTHOR: Wechsler, K. JOURNAL: Quest. WEB SITE: http://www.mdausa.org/publications/Quest/q11
Reacher
DO-IT-YOURSELF-ENTRY --- PURPOSE: To assist an individual who uses a wheelchair in picking up items. A set of long barbecue tongs can be attached to the wheelchair and used to retrieve items. It can be used in conjunction with the hook on a wire hanger to pull items within reach. MATERIALS: Barbecue tongs and wire hanger. TITLE: Doing It Yourself. JOURNAL: Quest. REF: Volume 12, Number 1, January/February 2005. WEB: http://www.mdausa.org/publications/Quest/q121diy.cfm
Reacher (Model 6006)
The Reacher, model 6006, is a wooden reacher designed to assist individuals in picking up objects without bending or stretching. This large, wooden scissor-style reacher features a scissor grip, non-slip ends, and a magnetic tip. DIMENSIONS: 27 inches long.
Reacher (Model Nc23621)
The Reacher, model NC23621, is designed to assist individuals with limited reach or who need assistance in reaching objects without significant bending or stretching. This reacher features a plastic pistol grip, a lightweight, unbreakable plastic claw, and an aluminum shaft. The trigger control mechanism allows the user to control the width of the opening of the gripper claw, allowing the device to grip both small and large objects. The reacher also features a 0.75-inch tall metal lug on the top
Reacher (Model R405)
The Reacher, model R405, consists of a horizontal grip and double, voluntary closing claws for gripping bulky items. DIMENSIONS: 31 inches long. WEIGHT: 9 ounces.
Reacher/Grabber
The Reacher/Grabber is designed for people with fine motors, upper extremity, and grasping disabilities. The reacher is simply operated by a flex of the wrist so no need for finger function or an ability to give a firm squeeze. The device is adjustable to your measurements (no “one-size fits no-one”) and is available in left or right hand variations.
Reachers
These reachers feature a vertical grip, voluntary opening, and rubber bands that control the closing pressure. DIMENSIONS: 20 or 26 inch lengths.
Rehab Accessory Pack
The Rehab Accessory Pack is designed for users to rehab after hip replacement surgery. The rehab kit offers a 24 plastic shoe horn, a 24 trigger-activated grabber, a 22 long sponge on a stick, and a 9 long semi-rigid sock aid with cord and foam handles. Additionally, the items will relieve the user of unnecessary reaching and stretching that may cause injury.
Rehab Accessory Pack III
The Rehab Accessory Pack III is designed for users to use during rehabilitation after a hip replacement surgery. The rehab kit offers a 24 plastic shoe horn, a 24 trigger-activated grabber, a 22 long sponge on a stick, and a 9 long flexible terry cloth sock aid. Additionally, the items will relieve the user of unnecessary reaching and stretching that may cause injury.
Reid PikStik TelescoPik Reacher, Model T3044
Reid PikStik TelescoPik Reacher is designer for people with fine motors, upper extremity, and grasping disabilities. It comes with a turn of the locking collar on the shaft. It intended to be durable, safe, and lightweight that makes it an aid to reach objects. It has an adjustable length from 30 inches to 44 inches that adapts to the need of the user.
Sammoms Preston Reacher (Models 4107 & 4109)
The Sammons Preston Reacher is a lightweight aluminum reacher designed for use by people wh use wheelchairs or who are unable to bend or to reach overhead to retrieve items. This reacher features a pistol grip and a trigger which, when sqeezed, closes the single claw around the item to be grasped. A pulling lug is fastened on top of the reacher and there is a magnet on the end for retrieving small metal items. DIMENSIONS: Model 4107 is 32 inches long and model 4109 is 26 inches long. WEIGHT: Mod
Sammons Preston Complete Hip Replacement Kit With Reacher
The Sammons Preston Complete Hip Replacement Kit With Reacher is designed for use by individuals who have had a hip and knee replacement or who have mobility disabilities. The kit features eight household necessities for clients recovering from hip surgery and includes a plastic bag.
Sammons Preston Deluxe Hip and Knee Equipment Package
The Sammons Preston Deluxe Hip and Knee Equipment Package is designed to allow those with limited mobility to function more independently during daily tasks. Each kit includes the following: SPR 26 inch or 32 inch Reacher, Flexible Sock and Stocking Aid, 24 inch E-Z Slide Shoehorn and 27 inch Ergonomic Handle Sponge, Contour.
Sammons Preston Feather Reach Economy Reacher (Model A665008 & A665009)
The Sammons Preston Feather Reach Economy Reacher,model 665008 and 665009 is designed for use by individuals with mobility disabilities and limited hand strength. This device enables users to reach items overhead or on the floor without stretching or bending. This lightweight aluminum reacher features a grasping jaw and a contoured, textured pistol-grip handle. A rubber tip aids in picking up small metal items. SIZES: Standard (model A665008 and long (model 665009). The standard model is 26 inch
Sammons Preston Standard Reachers
The Sammons Preston Standard Reachers are designed for use by persons with limited reach and hand strength. These reachers have a serrated claw-style jaw with a flexible foam rubber tip that conforms to the shape of most objects weighing one pound or less. The reachers are designed with an ergonomic plastic pistol grip and a sqeeze trigger and an aluminum shaft with a pulling lug on top anda magnetic tip for retrieving small metal objects. DIMENSIONS: Available in 26 inches long or 32 inches lon
Shorty Cripper
The Shorty Cripper is a reacher or grabber specifically designed for quadriplegics who have wrist function that allows them to bend their hand back at the wrist. It can also be used by any person with grasping, fine motor, neurological or upper extremity disabilities who needs assistance reaching or gripping objects. The Shorty Cripper is available in Lightweight and Heavy Duty models, and both models are available for the right or left hand in a range of custom sizes. Made with aluminum and sta
Telescoping Light Switch Device.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Telescoping rod for reaching light switches. Telescoping radio or television antenna with a small rubber furniture tip on one end and a ring on the other; can be used to push or pull a switch. SKILLS REQUIRED: Assembly. AUTHOR: Independence Factory TITLE: Make it Cheap: Volume 3 REF: Middletown, Ohio: Independence Factory NARIC CALL NUMBER: R1183 PAGES (including cover): 2 1976.
Telestik (Model Ad3000)
The TeleStik, model AD3000, is a reacher designed for use by individuals with upper extremity or mobility disabilities or spinal cord injury. This reacher has a telescoping stainless steel arm equipped with a washable UltraStik adhesive disk to pick up items weighing up to to one pound. The reacher has a soft, slip-resistant PVC grip. To use, place the adhesive disk flat on the object that is to be picked up. Press gently and bring object to the user. For heavier objects, after pressing gently,
Telestik (Model Ma4000)
The TeleStik, model MA4000, is a reacher designed for use by individuals with upper extremity or mobility disabilities or spinal cord injury. This reacher has a telescoping stainless steel arm equipped with a strong magnet for picking up metal items weighing up to one pound and a hook for pulling or dragging items. The hook is also useful for opening cupboards, pushing elevator buttons, retrieving clothing, etc. In addition, the hook is helpful for those who have any difficulty extending the tel
Telestik (Model Ts3040)
The TeleStik, model TS3040, is a reacher designed for use by individuals with upper extremity or mobility disabilities or spinal cord injury. This reacher has a telescoping stainless steel arm equipped with a strong magnet for picking up metal items weighing up to one pound and a hook for pulling or dragging items. The hook can also be used for opening cupboards, pushing elevator buttons, retrieving clothing etc. In addition, the hook is helpful for those who have any difficulty extending the te
Total Hip Kit
The Total Hip Kit is designed for use by individuals who have had a hip replacement. The kit includes a Tall-Ette elevated toilet seat (see also separate entry), a long-handled sponge for bathing, a long-handled shoe horn, a sock aid to assist in putting on socks without bending, and a reacher with a pistol grip and a single claw gripper. The kit is packed in a sturdy cardboard carrying box and includes instructions forthe use of each item. The kit is also available without the toilet seat.
Trigger Reacher (R402, R403, & R404)
The Trigger Reacher is a pistol grip reacher designed for use with one hand. The reachers feature scalloped jaws which firmly grip both hard and soft objects, a small magnet on the tip, and voluntary closing action. DIMENSIONS: Model R402 is 26 inches long; model R403 is 32 inches long; and model R404 is a folding reacher measuring 24 inches long when open; 12 inches folded. WEIGHT: 5.25 ounces.
Unger Nifty Nabber Trigger Grip
Unger Nifty Nabber Trigger Grip is designed for use by individuals with limited arm, shoulder and back movement as a result of arthritis, surgery or neurological involvement. It is a medium-duty grabber featuring a magnetic tip, 360 degree rotating head and smooth-action trigger grip. The light-weight design enables greater wrist flexibility and less arm stress. It utilizes an ergonomic designed grip with trigger-pull action for increased comfort and efficiency. The rubber claws with magnetic ti
Unger Nitty Nabbers
Unger Nitty Nabbers is designed for use by individuals with limited arm, shoulder and back movement as a result of arthritis, surgery or neurological involvement. The Unger Nitty Nabber is a multi-purpose reacher to assist with grabbing and reaching hard-to-reach objects without risking hand, arm, back or knee strain. Also allows picking up dirty items while avoiding skin contact or exposure to possibly harmful bacteria or chemicals. It was designed for an ergonomic grip for smooth trigger-pull
Vee-Zee C5 Reacher
The Vee-Zee C5 Reacher is a lightweight reacher designed for children and adults with severe arthritis, spinal injuries, wrist deformities, or minimally functional trunk musculature. It does not require finger function. It is operated from a T-shaped toggle lever at the top, instead of a conventional trigger and can be operated with the mouth. The arm support relieves virtually all stress on the radial side of the wrist while the wrist support prevents non-functional wrist extension. In the case